hyperfine

hyperfine

A command-line benchmarking tool.

(hyperfine in action, benchmarking mypy and ty)

Features

• Statistical analysis across multiple runs.
• Support for various performance metrics and hardware counters.
• Support for arbitrary shell commands.
• Constant feedback about the benchmark progress and current estimates.
• Warmup runs can be executed before the actual benchmark.
• Cache-clearing commands can be set up before each benchmark run.
• Statistical outlier detection to detect interference from other programs and caching effects.
• Export results to various formats: CSV, JSON, Markdown, AsciiDoc.
• Parameterized benchmarks (e.g. vary the number of threads).
• Cross-platform

Usage

Basic benchmarks

To run a benchmark, you can simply call hyperfine <command>.... Each argument is an executable and its arguments. Commands run directly by default; use -S for shell syntax such as pipes, redirections, and wildcards. For example:

hyperfine 'sleep 0.3'

Hyperfine will automatically determine the number of runs to perform for each command. By default, it will perform at least 10 benchmarking runs and estimate a run count targeting roughly 3 seconds, including shell overhead and preparation and conclusion commands. To set an exact number of runs, you can use the -r/--runs option:

hyperfine --runs 5 'sleep 0.3'

If you want to compare different programs, you can pass multiple commands:

hyperfine 'hexdump file' 'xxd file'

Commands run and appear in input order. The first command is the reference for all comparisons; each subsequent result shows its change from that reference.

Warmup runs and preparation commands

For programs that perform a lot of disk I/O, the benchmarking results can be heavily influenced by disk caches and whether they are cold or warm.

If you want to run the benchmark on a warm cache, you can use the -w/--warmup option to perform a certain number of program executions before the actual benchmark:

hyperfine -S --warmup 3 'grep -R TODO *'

Conversely, if you want to run the benchmark for a cold cache, you can use the -p/--prepare option to run a special command before each benchmark run. For example, to clear Linux filesystem caches, you can run

sync; echo 3 | sudo tee /proc/sys/vm/drop_caches

To use this specific command with hyperfine, call sudo -v to temporarily gain sudo permissions and then call:

hyperfine -S --prepare 'sync; echo 3 | sudo tee /proc/sys/vm/drop_caches' 'grep -R TODO *'

Parameterized benchmarks

If you want to run a series of benchmarks where a single parameter is varied (say, the number of threads), you can use the -P/--parameter-scan option and call:

hyperfine --prepare 'make clean' --parameter-scan num_threads 1 12 'make -j {num_threads}'

This also works with decimal numbers. The -D/--parameter-step-size option can be used to control the step size:

hyperfine --parameter-scan delay 0.3 0.7 -D 0.2 'sleep {delay}'

This runs sleep 0.3, sleep 0.5 and sleep 0.7.

For non-numeric parameters, you can also supply a list of values with the -L/--parameter-list option:

hyperfine -L compiler g++,clang++ '{compiler} -O2 main.cpp'

A common use case is comparing the same command across multiple Git branches. Use --setup to switch branches once before each set of benchmark runs, so the branch switch is not part of the measured command:

hyperfine \
    --parameter-list branch main,performance-improvements \
    --setup 'git switch {branch}' \
    'python main.py'

If you need a unique value for each individual run of a benchmark command, hyperfine also exposes the zero-based $HYPERFINE_ITERATION environment variable inside the benchmarked command itself:

hyperfine -S 'my-command > output-${HYPERFINE_ITERATION}.log'

Intermediate shell

By default, benchmarked commands, including warmup runs, are executed directly, without an intermediate shell (--shell=none). Arguments are split using shell-like quoting, so quoted arguments containing spaces are supported. Shell syntax such as pipes, redirections, environment-variable expansion, *, and ~ is not interpreted. This avoids shell startup overhead and the noise from correcting for it, especially for fast commands (< 5 ms).

Commands containing unquoted, standalone shell operators such as && or > require an explicit choice: use -S / --shell=default to interpret shell syntax, or -N / --shell=none to pass the operators as literal arguments.

To enable shell syntax, use -S (an alias for --shell=default). This selects sh on Unix (resolved through PATH) or cmd.exe on Windows:

hyperfine -S 'sleep 0.1 && echo done'

You can also select a specific shell with --shell <SHELL>:

hyperfine --shell zsh 'for i in {1..10000}; do echo test; done'

The --setup, --prepare, --conclude, and --cleanup commands always run through a shell. They use the shell selected by --shell, or the platform shell (sh on Unix, cmd.exe on Windows) when --shell is omitted or set to none.

When benchmarked commands use a shell, hyperfine corrects for the shell spawning time. It runs the shell with an empty command multiple times to measure its startup time, then subtracts this time from each time measurement.

Shell functions

If you are using bash, you can export shell functions to directly benchmark them with hyperfine:

my_function() { sleep 1; }
export -f my_function
hyperfine --shell=bash my_function

Otherwise, inline the function into the benchmarked command:

hyperfine -S 'my_function() { sleep 1; }; my_function'

Environment variables

Use --env to set environment variables for benchmark commands and their respective setup, prepare, conclude, and cleanup commands. Assignments are space-separated and support shell-style quoting, but no shell expansion:

hyperfine --env 'OMP_NUM_THREADS=8 CFLAGS="-O3 -march=native"' 'my_command'

Specify once for all commands or once per benchmark command:

hyperfine \
  --env 'OMP_NUM_THREADS=8' './benchmark-cpp' \
  --env 'RAYON_NUM_THREADS=8' './benchmark-rust'

Use an empty --env='' for no overrides. Values can contain parameter placeholders. For example, the following benchmarks my_command with OMP_NUM_THREADS ranging from 1 to 8:

hyperfine -P threads 1 8 --env 'OMP_NUM_THREADS={threads}' 'my_command'

Choosing metrics and units

By default, hyperfine displays wall-clock time and memory usage (time_wall_clock,memory_peak_resident). Use --metrics with a comma-separated list to select a different set of metrics. Each metric can have an optional unit after it:

hyperfine \
    --metrics memory_peak_resident:MiB,time_wall_clock:ms,instructions \
    './baseline' './candidate'

The following metrics are available:

• time_wall_clock: Time from start to finish, including time spent waiting, in seconds.

• time_user: CPU time spent executing application and library code in user mode, summed across threads, in seconds.

  • Linux/macOS: Includes child-process time when parents wait for their children to finish.
  • Windows: Includes the command and its child processes.

• time_system: CPU time spent executing kernel code on the program's behalf, for example to read files, summed across threads, in seconds.

  • Linux/macOS: Includes child-process time when parents wait for their children to finish.
  • Windows: Includes the command and its child processes.

• time_cpu: Total CPU time, calculated as time_user + time_system for each run, in seconds. It excludes time spent sleeping or waiting without executing. CPU time is summed across threads, so it can exceed wall-clock time: four threads running on four cores for one second can consume roughly four CPU-seconds.

• memory_peak_resident: Peak memory held in physical RAM, in bytes.

  • Linux/macOS: Peak resident set size (RSS). This is the largest per-process peak among the command and child processes (whose usage is collected when their parents wait for them), not the simultaneous total memory of the full process tree. On Linux, measuring commands with a very small peak RSS (below the peak inherited from hyperfine at startup, which can be a few MiB) will currently result in that inherited value being reported instead.
  • Windows: Currently not supported.

• cpu_cycles: CPU cycles consumed.

  • Linux: Includes threads and child processes, but excludes kernel and hypervisor execution.
  • macOS: Includes the process's threads and kernel execution, but excludes child processes.
  • Windows: Currently not supported.

• instructions: Completed CPU instructions.

  • Linux/macOS: Same scope as cpu_cycles.
  • Windows: Currently not supported.

• cache_references: Cache accesses counted by the CPU's generic cache event.

  • Linux: Same scope as cpu_cycles. Cache-event definitions depend on the CPU.
  • macOS/Windows: Currently not supported.

• cache_misses: Cache misses.

  • Linux: Same scope as cpu_cycles. Cache-event definitions depend on the CPU.
  • macOS/Windows: Currently not supported.

• branch_misses: Mispredicted branches.

  • Linux: Same scope as cpu_cycles.
  • macOS/Windows: Currently not supported.

Note that hardware counters are not available when a shell is enabled (--shell=..).

Time measurements support units ns, us, ms, s, min, and h. Memory measurements support B, kB, MB, GB, TB, KiB, MiB, GiB, and TiB. Hardware counters support count (1), k (thousand), M (million), and B (billion).

You can also use a preset to select a group of metrics:

Preset	Metrics
--metrics=default	time_wall_clock,memory_peak_resident
--metrics=time	time_wall_clock,time_cpu,time_user,time_system
--metrics=all	All available metrics

Exporting results

Hyperfine can export results to CSV, JSON, Markdown, AsciiDoc, and org-mode. CSV exports all selected metrics, while Markdown, AsciiDoc, and org-mode contain only the primary metric, which is the first metric selected by --metrics.

Markdown

You can use the --export-markdown <file> option to create tables like the following:

Command	Mean Wall Time [s]	Change	Factor
find . -iregex '.*[0-9]\.jpg$'	2.275 ± 0.046
find . -iname '*[0-9].jpg'	1.427 ± 0.026	-37.3%	(1.6x faster)
fd -HI '.*[0-9]\.jpg$'	0.232 ± 0.002	-89.8%	(9.8x faster)

JSON

The JSON export includes all available metrics listed in Choosing metrics and units for each measured run (excluding warmup runs).

The JSON output is useful if you want to analyze the benchmark results in more detail. The scripts/ folder includes a lot of helpful Python programs to further analyze benchmark results and create helpful visualizations, like a histogram of runtimes or a whisker plot to compare multiple benchmarks.

For example, these two commands create the following plots:

uvx --from 'git+https://github.com/sharkdp/hyperfine' \
  plot_histogram results.json
uvx --from 'git+https://github.com/sharkdp/hyperfine' \
  plot_whisker results.json

CSV

Use --export-csv <file> to export one row per command. Each metric selected by --metrics contributes a group of columns, in selection order: <metric>_unit, <metric>_mean, <metric>_stddev, <metric>_median, <metric>_min, and <metric>_max.

CSV uses explicitly selected units, or base units (seconds, bytes, or counts) when omitted.

Detailed benchmark flowchart

The following chart explains the execution order of various benchmark runs when using options like --warmup, --prepare <cmd>, --setup <cmd> or --cleanup <cmd>:

Installation

On Ubuntu

On Ubuntu, hyperfine can be installed from the official repositories:

apt install hyperfine

Alternatively, for the latest version, you can download the appropriate .deb package from the Release page and install it via dpkg:

wget https://github.com/sharkdp/hyperfine/releases/download/v2.0.0/hyperfine_2.0.0_amd64.deb
sudo dpkg -i hyperfine_2.0.0_amd64.deb

On Fedora

On Fedora, hyperfine can be installed from the official repositories:

dnf install hyperfine

On Alpine Linux

On Alpine Linux, hyperfine can be installed from the official repositories:

apk add hyperfine

On Arch Linux

On Arch Linux, hyperfine can be installed from the official repositories:

pacman -S hyperfine

On Debian Linux

On Debian Linux, hyperfine can be installed from the official repositories:

apt install hyperfine

On Exherbo Linux

On Exherbo Linux, hyperfine can be installed from the rust repositories:

cave resolve -x repository/rust
cave resolve -x hyperfine

On NixOS

On NixOS, hyperfine can be installed from the official repositories:

nix-env -i hyperfine

On Flox

On Flox, hyperfine can be installed as follows.

flox install hyperfine

Hyperfine's version in Flox follows that of Nix.

On openSUSE

On openSUSE, hyperfine can be installed from the official repositories:

zypper install hyperfine

On Void Linux

Hyperfine can be installed via xbps

xbps-install -S hyperfine

On macOS

Hyperfine can be installed via Homebrew:

brew install hyperfine

Or you can install using MacPorts:

sudo port selfupdate
sudo port install hyperfine

On FreeBSD

Hyperfine can be installed via pkg:

pkg install hyperfine

On OpenBSD

doas pkg_add hyperfine

On Windows

Hyperfine can be installed via Chocolatey, Scoop, or Winget:

choco install hyperfine

scoop install hyperfine

winget install hyperfine

With conda

Hyperfine can be installed via conda from the conda-forge channel:

conda install -c conda-forge hyperfine

With cargo (Linux, macOS, Windows)

Hyperfine can be installed from source via cargo:

cargo install --locked hyperfine

Make sure that you use Rust 1.97 or newer.

From binaries (Linux, macOS, Windows)

Download the corresponding archive from the Release page.

Alternative tools

Hyperfine is inspired by bench.

Integration with other tools

Chronologer is a tool that uses hyperfine to visualize changes in benchmark timings across your Git history.

Bencher is a continuous benchmarking tool that supports hyperfine to track benchmarks and catch performance regressions in CI.

Drop hyperfine JSON outputs onto the Venz chart to visualize the results, and manage hyperfine configurations.

Make sure to check out the scripts folder in this repository for a set of tools to work with hyperfine benchmark results.

Origin of the name

The name hyperfine was chosen in reference to the hyperfine levels of caesium 133 which play a crucial role in the definition of our base unit of time — the second.

Citing hyperfine

Thank you for considering citing hyperfine in your research work. Please see the information in the sidebar on how to properly cite hyperfine.

License

hyperfine is dual-licensed under the terms of the MIT License and the Apache License 2.0.

See the LICENSE-APACHE and LICENSE-MIT files for details.